46
National patents
China Flooring For High Traffic Commercial Areas Factory
In environments such as retail corridors, airport terminals, and healthcare facilities, flooring must endure constant foot traffic, rolling loads, and frequent cleaning cycles while maintaining
Order this product
China Flooring for High Traffic Commercial Areas
In environments such as retail corridors, airport terminals, and healthcare facilities, flooring must endure constant foot traffic, rolling loads, and frequent cleaning cycles while maintaining appearance and safety.
Material Composition and Construction
The product consists of a homogeneous polyvinyl chloride (PVC) wear layer bonded to a reinforced foam backing. The wear layer thickness typically ranges from 0.5 mm to 0.7 mm, providing resistance to abrasion and staining.
A glass‑fiber reinforcement layer is embedded within the backing to improve dimensional stability under temperature fluctuations. The overall thickness is selectable between 2.0 mm and 3.0 mm depending on load requirements.
Performance Characteristics
Key mechanical properties are measured according to ISO standards:
- Abrasion loss ≤ 0.08 g after 1000 cycles (ISO 10545‑7)
- Indentation resistance ≤ 0.15 mm under a 500 N static load (ISO 24343‑1)
- Slip resistance (R‑value) ≥ 0.45 (wet pendulum test)
- Fire rating Bfl‑s1 (EN 13501‑1)
These values represent typical results; actual performance can be adjusted by modifying wear‑layer thickness or backing density.
Typical Applications
The flooring is suited for areas where continuous pedestrian flow and occasional cart traffic occur.
- Retail store aisles and checkout zones
- Airport concourses and baggage claim halls
- Hospital corridors and patient rooms
- Educational institution lobbies and laboratories
In each case, the product’s low maintenance requirements and resistance to chemical spills reduce lifecycle cost.
Quality Control and Testing
Each production lot undergoes inline thickness monitoring and post‑extrusion visual inspection for surface defects.
Samples are submitted for accelerated wear testing (Taber abrasion) and chemical resistance evaluation (ISO 26987). Results are recorded and retained for traceability.
Customization Options
Buyers can specify wear‑layer thickness, overall gauge, surface emboss pattern, and edge profiling to match project specifications.
| Parameter | Typical Range | Notes |
|---|---|---|
| Wear‑layer thickness | 0.5 mm – 0.7 mm | Increases abrasion resistance |
| Overall thickness | 2.0 mm – 3.0 mm | Affects indentation and acoustic performance |
| Surface emboss | Stone, wood, or abstract patterns | Custom designs available upon request |
| Edge profile | Square, beveled, or cove | Impacts installation method and seam visibility |
Installation Considerations
The flooring can be installed using a pressure‑sensitive adhesive or a loose‑lay system with double‑sided tape, depending on subfloor condition.
Acclimatization of the material to ambient temperature for 24 hours prior to installation minimizes post‑installation dimensional change.
Frequently Asked Questions
Can dimensions be customized? Yes, both width and length can be cut to project‑specific sizes; standard rolls are 2 m wide.
What information is required before quotation? Required data include total area, expected traffic class, preferred wear‑layer thickness, and any special surface finish.
How is quality inspected? Each batch undergoes thickness gauging, abrasion testing, and visual inspection; test reports are available upon request.
What packaging methods are available? Rolls are wrapped in polyethylene film and placed on pallets with corner protectors; custom crating can be arranged.
What is the typical production lead time? Lead time ranges from 15 to 25 working days after receipt of confirmed technical specifications.
Contact for Technical Inquiry
For detailed technical data sheets, sample requests, or project‑specific consultation, please reach out via the contact form.
Submit Inquiry#
01
Vinyl flooring line
600
K+ SQ.M capacity
2007
Founded