46
National patents
Factory Direct Commercial Engineered Wood Flooring Company
Factory direct sourcing of commercial engineered wood flooring eliminates intermediate distributors, allowing specifiers to obtain product data directly from the manufacturer. This page outlines the
Order this product
Factory Direct Commercial Engineered Wood Flooring
Factory direct sourcing of commercial engineered wood flooring eliminates intermediate distributors, allowing specifiers to obtain product data directly from the manufacturer. This page outlines the technical construction, performance characteristics, and options that influence long‑term value in high‑traffic environments.
Construction & Materials
The wear layer is a solid sawn hardwood veneer, typically ranging from 0.6 mm to 2.0 mm thick, selected for its abrasion resistance and ability to be sanded and refinished multiple times.
Underlying the wear layer, a cross‑balanced core consists of three to five plies of hardwood or high‑density fiberboard, each ply oriented at 90° to the adjacent layer to minimize dimensional change under humidity fluctuations.
Adhesive bonds are phenol‑formaldehyde (PF) resin systems formulated to meet CARB Phase 2 and EPA TSCA Title VI low‑emission standards, providing durability while limiting volatile organic compound release.
Performance Characteristics
Key performance indicators are measured according to ASTM and EN standards, enabling direct comparison with alternative flooring systems.
| Property | Typical Value |
|---|---|
| Total Thickness | 10 mm – 22 mm (depending on construction) |
| Wear Layer Thickness | 0.6 mm – 2.0 mm |
| Surface Hardness (Janka) | 1,200 – 1,500 lbf (oak, maple) |
| Dimensional Change Coefficient | 0.001 – 0.003 %/% RH |
| VOC Emission | <0.05 mg/m²·h (CARB Phase 2 compliant) |
| Abrasion Resistance (Taber) | 6,000 – 9,000 cycles to wear‑through |
| Warranty (commercial) | 10‑year limited wear warranty |
Applications
Commercial environments demand flooring that resists surface wear from rolling loads, maintains appearance under frequent cleaning, and accommodates seasonal humidity shifts without excessive gapping or cupping. Engineered wood’s dimensional stability and refinishing capability address these requirements while offering a warm aesthetic that supports brand identity.
- Retail stores
- Hospitality lobbies
- Office corridors
- Educational facilities
- Healthcare waiting areas
Customization Options
Because the product is manufactured to order, specifiers can tailor visual and dimensional attributes to match project schedules and design intent.
- Species: oak, maple, walnut, hickory, bamboo
- Finish: matte, semi‑gloss, high‑gloss, UV‑cured urethane, oil‑based
- Plank width: 100 mm – 300 mm
- Plank length: 600 mm – 2,200 mm
- Edge profile: square, micro‑bevel, eased
- Surface texture: smooth, hand‑scraped, wire‑brushed, distressed
Quality Control & Testing
In‑process monitoring includes moisture content verification (±0.5 % target), bond strength testing via pull‑off assays (minimum 1.2 MPa), and accelerated abrasion cycles to predict long‑term wear. Finished boards undergo static load indentation and resistance to staining checks before packaging.
Packaging & Logistics
Boards are stacked in moisture‑barrier wrapped pallets, protected by corner guards and stretch film, then unitized for forklift handling. Each pallet carries a label with product code, batch number, and QR code linking to the installation guide and maintenance sheet.
Lead Time & Ordering
Factory‑direct lead times typically range from 3 to 6 weeks for standard configurations, with expedited options available for critical schedules. Minimum order quantities start at 500 square feet, and sample kits containing three finish swatches and two full‑size planks can be shipped within 5 business days upon request.
Frequently Asked Questions
Can dimensions be customized?
Yes. Plank width, length, and thickness are adjusted according to project specifications, with typical ranges noted in the customization section.
What information is required for a quotation?
Project square footage, desired wear layer thickness, species, finish, edge profile, and any special packaging or delivery constraints.
Which species and finishes are available?
Common species include oak, maple, walnut, hickory, and bamboo; finishes span matte, semi‑gloss, high‑gloss, UV‑cured urethane, and oil‑based options.
How is quality inspected?
Each batch undergoes moisture content checks, bond strength pull‑off tests, Taber abrasion cycles, and visual inspection for surface defects before packaging.
What packaging methods protect the product during transit?
Boards are placed on moisture‑barrier wrapped pallets, fitted with corner guards, and secured with stretch film; pallets are labeled and unitized for forklift handling.
What is the typical production lead time?
Standard lead times are 3–6 weeks; expedited schedules can be arranged depending on capacity and order complexity.
How are samples arranged?
Sample kits containing three finish swatches and two full‑size planks are prepared upon request and shipped via courier within 5 business days.
Ready to discuss your project requirements?
Request a Quote#
01
Vinyl flooring line
600
K+ SQ.M capacity
2007
Founded