Wholesale Commercial Polished Concrete Flooring Systems

Polished concrete flooring systems are produced by mechanically grinding, honing, and polishing a concrete slab to achieve a specified surface finish.

The process begins with a properly proportioned concrete mix that meets compressive strength requirements for the intended load, typically 30‑40 MPa after 28 days.

After curing, abrasive diamonds of progressively finer grits remove surface laitance and expose the desired aggregate, followed by resin‑based densifiers that increase surface hardness.

Technical Specifications

Performance characteristics vary with mix design, polishing depth, and sealer selection; the following table shows typical ranges for a standard 150 mm thick industrial slab.

Application Considerations

In warehouse and distribution centers, floor systems must sustain repeated fork‑lift traffic, resist impact from pallet drops, and facilitate easy cleaning.

Retail environments benefit from a high‑gloss finish that enhances lighting reflectivity while maintaining slip resistance for public safety.

• Logistics warehouses – high load capacity, dust‑free surface
• Manufacturing plants – chemical resistance to oils and solvents
• Showrooms and retail – aesthetic gloss, low maintenance
• Educational institutions – durable, easy to sanitize

Customization Options

Design flexibility is achieved by varying aggregate exposure, color pigments, and surface treatments to meet project‑specific aesthetic and functional requirements.

• Aggregate exposure: full, partial, or nil (cream finish)
• Integral color dyes or surface stains for custom hues
• Saw‑cut or scored patterns for wayfinding or branding
• Edge treatments: rounded, beveled, or left raw
• Sealer types: penetrating silicate, acrylic, epoxy, or polyurethane topcoats

Quality Control & Testing

Quality assurance starts with mix design verification and continues through each production stage to ensure the finished floor meets performance specifications.

• Slump test and air content verification before placement
• Compressive strength cylinders cured and tested at 3, 7, and 28 days
• Gloss measurement with a 60° glossmeter after each polishing pass
• Slip resistance testing using a calibrated tribometer
• Visual inspection for aggregate exposure uniformity and defect‑free surface

Supply & Logistics

As a wholesale supplier, we provide polished concrete flooring systems in bulk quantities suitable for large‑scale projects, with packaging designed to protect the product during transport and storage.

• Pre‑mixed concrete bags (25 kg) or ready‑mix truckloads
• Polishing pads and diamonds supplied in sealed containers
• Densifiers and sealers in drums or intermediate bulk containers (IBCs)
• Palletized packaging with stretch wrap and corner boards
• Lead time typically 2‑4 weeks depending on order size and destination

Frequently Asked Questions

Can the slab thickness be customized?

Yes, thickness is adjusted according to load requirements; typical industrial slabs range from 100 mm to 200 mm.

What information is needed before a quotation?

Project dimensions, expected traffic load, desired gloss level, any chemical exposure, and preferred sealer type.

How are quality and consistency verified?

Each batch undergoes slump, air, and compressive strength testing; finished floors are inspected for gloss and slip resistance before release.

What packaging options are available for export?

Products are packed in moisture‑resistant bags, placed on pallets, and secured with strapping and stretch wrap for containerized shipment.

Get a Quote

To discuss your project specifications and receive a detailed, no‑obligation quotation, please contact our technical sales team.