46
National patents
Wholesale Mohawk Commercial Carpet Tiles Supplier
Mohawk commercial carpet tiles are engineered for high‑traffic environments where durability, acoustic performance, and ease of maintenance are critical specifications. Each tile consists of a
Order this product
Wholesale Mohawk Commercial Carpet Tiles Supplier
Mohawk commercial carpet tiles are engineered for high‑traffic environments where durability, acoustic performance, and ease of maintenance are critical specifications. Each tile consists of a solution‑dyed nylon face fused to a reinforced polymer backing, providing dimensional stability under constant foot load and resistance to delamination in humid conditions.
The manufacturing process uses a tuft‑and‑heat‑set method that locks the pile height to a tolerance of ±0.5 mm, ensuring uniform appearance across large installations. This precision reduces visible seams and simplifies alignment during rapid‑lay projects.
Construction and Materials
The face yarn is solution‑dyed nylon 6,6 with a denier range of 1200–1500 dtex, selected for its colorfastness and abrasion resistance measured by ASTM D4157 (Wyzenbeek) at 30,000 double rubs without noticeable wear.
The backing incorporates a polyvinyl chloride (PVC) compound reinforced with a fiberglass scrim, delivering a tensile strength of approximately 2.5 MPa in the warp direction and a tear resistance exceeding 15 N per ASTM D2261.
Performance Characteristics
Slip resistance is evaluated per ASTM E303 (British Pendulum) yielding a typical wet pendulum value of 45 BPN, suitable for areas requiring ADA‑compliant traction.
Thermal conductivity of the tile assembly is around 0.14 W/(m·K), contributing to modest insulation benefits that can reduce HVAC load in perimeter zones.
Dimensional stability after exposure to 80 % relative humidity at 40 °C for 24 hours shows less than 0.2 % linear change, indicating minimal risk of buckling or gap formation over time.
Typical Applications
In corporate offices, the acoustic absorption coefficient (NRC) of approximately 0.30 helps lower reverberation times, improving speech intelligibility in open‑plan layouts without additional ceiling treatments.
Educational facilities benefit from the tile’s low VOC emissions (certified to CDPH/EHLB/Standard Method V1.1), supporting indoor air quality goals for classrooms and laboratories.
Healthcare corridors use the product’s antimicrobial treatment (silver‑ion based) that inhibits bacterial growth, achieving a >99 % reduction of Staphylococcus aureus after 24 hours per ISO 22196.
Customization Options
Tile dimensions are available in standard 50 cm × 50 cm squares, with custom sizes ranging from 30 cm × 30 cm to 100 cm × 100 cm achievable through water‑jet cutting of the backing material.
Pattern options include solid colors, linear gradients, and geometric motifs generated via digital printing on the nylon face, allowing repeat tolerances of ±2 mm across production runs.
Backing variations encompass standard PVC, recycled PVC blends, and polyurethane alternatives, each affecting flexural modulus and environmental impact metrics such as recycled content percentage.
Quality Control and Testing
Incoming yarn is inspected for denier uniformity using laser micrometry, with acceptance criteria set at ±3 % of target value before tufting begins.
Finished tiles undergo a static load test per ASTM F970 (Modified) where a 250 lb indenter is applied for 24 hours; residual thickness loss must remain under 0.1 mm to pass.
Random sampling includes accelerated weathering (UV‑B exposure) for 500 hours, after which color difference (ΔE) is measured; values below 2.0 indicate acceptable fade resistance for interior use.
Specifications Table
| Property | Typical Value | Test Method |
|---|---|---|
| Pile Height | 5.0 mm ±0.5 mm | ISO 1766 |
| Tile Weight | 4.2 kg/m² | ASTM D3574 |
| Wear Resistance (Wyzenbeek) | 30,000 double rubs | ASTM D4157 |
| Slip Resistance (Wet Pendulum) | 45 BPN | ASTM E303 |
| Thermal Conductivity | 0.14 W/(m·K) | ASTM C518 |
| VOC Emission | ≤0.5 mg/m³ | CDPH/EHLB/Standard Method V1.1 |
Frequently Asked Questions
Can tile dimensions be customized for modular layouts?
Yes, water‑jet cutting allows precise tolerances (±0.5 mm) for non‑standard sizes, enabling seamless integration with raised access floors or irregular room geometries.
What information is required before a quotation is issued?
Project square footage, desired pile height, backing type, color or pattern specifications, and any performance certifications (e.g., slip resistance, acoustic NRC) needed for the space.
Which material options are available for the backing?
Standard PVC, recycled PVC blends (up to 30 % post‑consumer content), and polyurethane backing are offered; each affects flexural modulus and environmental impact metrics.
How is product quality inspected before shipment?
Every batch undergoes dimensional checks, wear resistance sampling, and VOC testing; results are documented in a batch‑specific test report accompanying the delivery.
What packaging methods protect tiles during transit?
Tiles are stacked in corrugated cartons with edge protectors, then palletized and stretch‑wrapped; cartons include moisture‑barrier liners for humid climates.
What is the typical production lead time?
Lead times range from 2–4 weeks for standard colors and 4–6 weeks for custom patterns, depending on order volume and backing selection.
Contact for Quote
To discuss your project requirements, request samples, or obtain a detailed quotation, please reach out using the contact form below. Our technical team will review specifications and provide recommendations tailored to your facility’s performance criteria.
Request a Quote#
01
Vinyl flooring line
600
K+ SQ.M capacity
2007
Founded