Bulk Light Oak LVT Click Flooring – Wholesale Specification

This product is a modular luxury vinyl tile (LVT) system that utilizes a mechanical click‑lock joint, allowing floor panels to be secured without adhesives or curing time. The light oak surface replicates a natural wood grain while providing a uniform color palette suitable for large‑scale installations. Buyers purchasing in volume benefit from reduced handling complexity and predictable material performance across multiple sites.

Construction and Material Composition

The flooring consists of four primary layers: a 0.55 mm transparent wear layer treated with a polyurethane coating, a printed decorative film reproducing light oak, a rigid core made from calcium carbonate‑filled PVC, and a 0.5 mm balancing backing layer. The wear layer provides a Taber abrasion resistance rating of ≤ 50 mg loss after 1000 cycles under CS‑10 wheels, while the core contributes to dimensional stability with a linear expansion coefficient of approximately 0.06 mm/m·°C.

Typical Technical Specifications

Dimensions and Packaging for Bulk Orders

Standard plank dimensions are 1219 mm × 184 mm with a click‑lock profile on all four sides. Each carton contains 10 planks, covering approximately 2.24 m². For wholesale shipments, cartons are stacked on Euro‑pallets (1200 mm × 800 mm) with a maximum height of 1.6 m, yielding roughly 45 m² per pallet. Pallets are stretch‑wrapped and fitted with corner protectors to mitigate edge damage during transit.

Installation Considerations

The click system allows floating installation over clean, level substrates with a maximum deviation of 2 mm over 2 m. A 6 mm expansion gap is recommended around the perimeter and at fixed objects to accommodate thermal movement. No adhesive is required, but a compatible underlayment with a minimum compressive strength of 150 kPa may be used to improve acoustic performance and subfloor leveling.

Performance Characteristics

In addition to abrasion resistance, the product exhibits a residual indentation of less than 0.05 mm after a 75 kg static load for 24 hours, indicating suitability for areas with moderate furniture loads. Dimensional change after exposure to 80 % relative humidity at 40 °C for 6 hours remains below 0.15 %, confirming low hygroscopic expansion. The surface finish yields a gloss level of 7–10 GU, providing a low‑sheen appearance that hides minor scuffs.

Performance Test Results (Typical)

Applications in Industrial and Commercial Environments

The light oak finish provides a neutral backdrop that complements both corporate office spaces and light‑industrial settings such as assembly lines, workshops, and showroom floors. Its resistance to moisture ingress makes it appropriate for areas prone to occasional spills, while the click‑lock system enables rapid replacement of damaged sections without disrupting adjacent flooring. Acoustic testing shows a reduction of impact sound transmission by approximately 12 dB when installed over a 2 mm foam underlayment, contributing to quieter work environments.

Quality Control and Traceability

Production batches are assigned unique identifiers that link raw material specifications, extrusion parameters, and final inspection results. Each pallet receives a label containing batch number, production date, and QC passport reference. Incoming material is screened for PVC purity and filler distribution, while finished planks undergo random sampling for wear layer thickness, locking engagement force, and surface gloss. Deviations beyond ± 0.05 mm in thickness or ≤ 80 % of specified lock force trigger batch quarantine.

Frequently Asked Questions

• Can plank dimensions be customized? Yes, width and length adjustments are available upon request, subject to minimum order quantities and tooling constraints.
• What information is required before quotation? Project square footage, desired plank size, wear layer thickness, delivery timeline, and any special packaging needs.
• What wear layer options are offered? Standard thicknesses range from 0.30 mm to 0.70 mm, with corresponding abrasion ratings.
• How is quality inspected? Each lot undergoes dimensional checks, locking force testing, and surface finish evaluation per ISO standards.
• What packaging methods are available for export? Cartons can be palletized, strapped, and wrapped with UV‑resistant film; corner boards and moisture‑barrier sheets are optional.
• How are export shipments protected? Pallets are secured with stretch film, edge protectors, and placed in containers with adequate ventilation to prevent condensation.
• What is the typical production lead time? Lead times vary from 2‑4 weeks for stocked SKUs to 6‑8 weeks for customized runs, depending on order volume.
• How are samples arranged? Sample kits containing up to three planks and a small underlayment piece can be dispatched via courier upon request.

Request a Quote or Sample

For technical data sheets, pricing proposals, or to obtain a physical sample, please contact our sales team using the inquiry form linked below.