China Commercial Glue Down Vinyl Plank Flooring Factory

Glue‑down vinyl plank flooring consists of a printed decorative film, a transparent wear layer, and a PVC backing that is adhered directly to a prepared sub‑floor with a pressure‑sensitive adhesive. This construction eliminates the need for a click‑lock system and provides a monolithic surface that resists movement under heavy loads.

Manufacturers typically extrude a homogeneous PVC core, then laminate a high‑definition print layer and a urethane‑reinforced wear layer before cooling and cutting the product to plank dimensions. The wear layer thickness is a critical factor because it determines abrasion resistance and the expected service life in high‑traffic zones.

Key technical characteristics for commercial glue‑down planks include total thickness ranging from 2.0 mm to 3.0 mm, wear layer thickness from 0.3 mm to 0.7 mm, dimensional stability after 24 h immersion usually below 0.15 % linear change, and slip resistance ratings (R10 to R13) achieved through surface embossing or additive treatments.

In addition to mechanical durability, the flooring exhibits low VOC emissions (typically ≤ 0.5 mg/m³) and can meet fire classifications such as Bfl‑s1 when formulated with appropriate additives. These properties support compliance with indoor air quality and safety regulations in offices, retail outlets, and hospitality venues.

Quality control begins with in‑line monitoring of extrusion thickness and continues with optical inspection of the print layer for color consistency and defect detection. Each batch undergoes abrasion testing (Taber) and dimensional stability checks before packaging, ensuring that the product meets the tolerances stated in the technical data sheet.

Customization options are driven by the end‑use environment. Clients can specify plank length (typically 900 mm to 1800 mm), width (100 mm to 225 mm), emboss pattern (stone, wood, abstract), and wear layer thickness to match expected footfall. Color matching is performed using spectrophotometric analysis to maintain brand fidelity across large installations.

Packaging for export uses corrugated cardboard boxes with internal polyethylene film to protect against moisture. Pallets are strapped and corner‑protected, and each shipment includes a packing list, material safety data sheet, and installation guidelines. Lead times are generally 4–6 weeks after receipt of confirmed artwork and specifications, depending on order volume.

For technical inquiries, sample requests, or a detailed quotation, please contact our engineering team.