Direct Factory SPC Waterproof Click Vinyl Flooring Supplier

Product Overview

SPC (stone plastic composite) vinyl flooring combines a rigid core of limestone and stabilizers with a wear layer and a printed design film. The core provides dimensional stability under temperature fluctuations, while the wear layer protects against abrasion and staining. This construction yields a floor that resists water infiltration and maintains flatness in humid environments.

Construction Details

A typical SPC click vinyl plank consists of four layers: a UV‑cured wear layer (0.2 mm to 0.5 mm thickness), a high‑resolution decorative film, a SPC core (approximately 4 mm to 6 mm thick) containing calcium carbonate and PVC, and a balanced backing layer that reduces cupping. The click system is milled into the core edges, allowing panels to lock without adhesives.

Performance Characteristics

Key technical values are presented below; actual numbers vary with formulation and are confirmed per project.

Installation Method

The click system enables floating installation over a clean, level subfloor. Panels are angled and pressed together, engaging the milled tongue and groove. No glue or nails are required, which reduces installation time and allows for easy disassembly if reconfiguration is needed. A 2 mm expansion gap around the perimeter accommodates thermal movement.

Typical Applications

Because the SPC core is impervious to water, the flooring suits areas where moisture exposure is frequent, such as food processing wash‑down zones, pharmaceutical cleanrooms, and locker rooms. The wear layer’s resistance to chemical spills and the low VOC emission profile make it appropriate for laboratories and electronics assembly areas where cleanliness is critical.

Quality Assurance

Each production lot undergoes inline thickness monitoring, wear layer abrasion testing (Taber ASTM D4060), and lock strength verification. Finished boards are inspected for color consistency, surface defects, and dimensional tolerance before packaging. Documentation of test results is available upon request.

Customization Options

Buyers can specify wear layer thickness, embossing pattern, bevel edge profile, and overall plank dimensions. Core formulation can be adjusted for increased impact resistance or enhanced acoustic performance. Color matching to corporate standards is achievable through the decorative film.

• Wear layer: 0.2 mm, 0.3 mm, 0.4 mm, 0.5 mm
• Plank width: 100 mm – 250 mm (step 10 mm)
• Plank length: 900 mm – 1800 mm (step 50 mm)
• Edge types: square, micro‑bevel, deep‑bevel
• Surface finishes: smooth, hand‑scraped, stone‑look emboss

Packaging and Logistics

Boards are stacked in cartons with edge protectors and shrink‑wrapped to prevent moisture ingress during transit. Each carton label includes product code, batch number, and QR code linking to the test certificate. Palletized shipments comply with ISPM‑15 standards for international freight.

Frequently Asked Questions

Can the plank dimensions be customized to match existing floor layouts?

Yes, width and length can be adjusted within the manufacturing tolerances; a layout drawing is required for quotation.

What information is needed to obtain a price quote?

Required details include total area, desired wear layer thickness, edge type, surface finish, any custom colors, and delivery destination.

Which materials are available for the SPC core?

The core consists of calcium carbonate and PVC; additive packages for increased flexibility or UV stabilization can be selected.

How is product quality verified before shipment?

Each batch undergoes dimensional checks, wear layer abrasion tests, lock strength measurements, and visual inspection; results are documented in a batch test report.

What packaging options protect the flooring during export?

Standard packaging uses cardboard cartons with corner guards and stretch film; additional options include moisture‑barrier bags and wooden crates for high‑risk routes.

Contact for Technical Inquiry

For detailed specifications, sample requests, or project‑specific consultation, please reach out via the contact form. Our engineering team will respond with the required data sheets and lead‑time estimates.