Factory Direct Green Vinyl Flooring Roll Sheets

Produced in a continuous roll format, these flooring sheets eliminate the need for frequent seaming, which reduces installation time and minimizes potential weak points in large‑area installations. The roll is supplied directly from the manufacturer, allowing tighter control over material consistency and lead times. This approach supports projects that require uniform appearance and performance across extensive floor plates.

Technical Specifications

Typical total thickness ranges from 2.0 mm to 3.0 mm, with a wear layer of 0.3 mm to 0.5 mm that protects against abrasion and chemical exposure. Roll width is commonly 2 m or 4 m, and lengths can be supplied up to 50 m per roll, depending on handling equipment. Weight per square meter falls between 2.4 kg/m² and 3.2 kg/m², facilitating manual or mechanical handling.

The core consists of polyvinyl chloride (PVC) resin blended with non‑phthalate plasticizers, calcium‑zinc stabilizers, and a measured proportion of post‑industrial recycled content. Surface embossing is applied to achieve a specific slip‑resistance profile while maintaining a low‑maintenance finish.

Performance Characteristics

Slip resistance is rated R10 to R11 according to DIN 51130, suitable for areas where occasional moisture or oil spillage may occur. Dimensional stability is maintained within ±0.2 % after exposure to 70 °C for 24 hours, ensuring the product does not contract or expand noticeably under temperature fluctuations. Fire performance typically meets Bfl‑s1 classification under EN 13501‑1, and total volatile organic compound (VOC) emissions are below 0.5 mg/m³ as measured by ISO 16000‑9.

Chemical resistance testing shows no noticeable degradation after 24‑hour immersion in common industrial solvents such as isopropyl alcohol, diluted sodium hydroxide, and mineral oils. This makes the flooring appropriate for environments where occasional chemical contact is expected.

Applications

The roll format and performance attributes make this flooring well‑suited for large, open spaces where long, uninterrupted runs reduce tripping hazards and simplify cleaning protocols. Industries that benefit include manufacturing plants, distribution warehouses, retail showrooms, healthcare facilities, and educational institutions.

• Manufacturing plants – continuous roll reduces seam-related particle accumulation.
• Warehouses – high wear layer withstands pallet traffic and occasional impact.
• Retail showrooms – uniform appearance supports brand presentation.
• Healthcare facilities – low VOC and easy‑to‑clean surface meet hygiene requirements.
• Educational institutions – slip resistance contributes to safety in corridors and labs.

Quality Assurance

In‑line thickness monitoring uses laser gauges with a tolerance of ±0.1 mm across the roll width. Adhesion between the wear layer and backing is evaluated by peel‑strength testing targeting a minimum of 1.5 N/mm. Each batch undergoes accelerated aging (UV exposure and humidity cycling) to verify colour stability and mechanical retention over a simulated five‑year service life.

Final inspection includes a visual check for surface defects, a coefficient of friction measurement, and a dimensional stability test after heat aging. Results are documented and available upon request.

Customization Options

Customers can specify total thickness, wear‑layer thickness, roll width, and length to match site‑specific handling equipment and layout requirements. Surface emboss patterns, colour pigments, and the proportion of recycled content are adjustable based on project goals. Edge treatments such as beveled or square edges can be supplied to accommodate different installation methods.

Frequently Asked Questions

Can dimensions be customized?

Yes. Roll width, length, and overall thickness are adjustable within the ranges outlined in the specifications table. Custom lengths beyond standard limits may require special handling considerations.

What information is needed for a quotation?

Required details include desired total thickness, wear‑layer thickness, roll width, length, colour or emboss pattern, quantity, and delivery destination. Any special performance criteria (e.g., specific slip‑resistance rating or fire classification) should also be provided.

How is quality inspected?

Quality control involves in‑line thickness gauging, peel‑strength testing, accelerated aging, visual defect inspection, and slip‑resistance measurement. Documentation of each test is available upon request.

What packaging methods are available?

Rolls are wrapped in protective polyethylene film, placed on sturdy cardboard cores, and secured with strapping. For export, rolls are packed in wooden pallets with corner protection and moisture‑barrier lining.

What is the typical production lead time?

Lead time depends on order complexity and current capacity, but standard configurations typically ship within 3‑4 weeks after receipt of a confirmed purchase order. Custom specifications may extend this period.

Request a Quote

To discuss your project requirements and obtain a detailed quotation, please contact our technical sales team.