Wholesale Shaw Vinyl Tile Flooring Supplier

Product Overview

Shaw vinyl tile flooring is a multi‑layer polymer product consisting of a PVC core, a printed design layer, and a transparent wear layer. The core provides dimensional stability, while the wear layer protects the surface from abrasion and staining. Typical tile sizes are 12 in × 12 in or 18 in × 18 in, with overall thicknesses ranging from 2.0 mm to 3.0 mm and wear‑layer thicknesses from 0.3 mm to 0.7 mm. These characteristics make the product suitable for high‑traffic wholesale distribution.

Technical Specifications

Typical technical data for Shaw vinyl tile flooring supplied in wholesale quantities are shown below.

Performance Characteristics

The 0.5 mm wear layer delivers an abrasion resistance of approximately 1500 cycles under ASTM D4060, indicating suitability for areas with frequent foot traffic and light wheeled equipment. Slip resistance rated R10 provides a safe walking surface under wet conditions commonly found in food processing or beverage warehouses. Dimensional stability measured after 24 h at 70 °C shows less than 0.1 % change, ensuring the tiles maintain joint integrity over time.

Chemical resistance testing per ISO 26987 shows no visible degradation after exposure to common industrial cleaners, oils, and mild acids for 24 hours. The product’s low VOC emission (≤0.5 mg/m³) contributes to indoor air quality compliance in enclosed facilities.

Applications in Industrial Settings

Warehouses and distribution centers benefit from the tile’s ability to withstand point loads from pallet jacks and forklifts without cracking, thanks to the flexible PVC core that distributes stress. The seamless appearance and ease of damp‑mop cleaning reduce maintenance labor in environments where hygiene is critical, such as pharmaceutical packaging lines.

Manufacturing facilities that require static‑dissipative flooring can specify optional conductive additives in the wear layer, meeting ESD protection standards while retaining the same wear performance. The product’s resistance to thermal cycling makes it appropriate for areas adjacent to ovens or freezers where temperature fluctuations occur.

Customization Options

Wholesale orders can be tailored to project requirements across several parameters.

• Color and pattern: Custom prints or standard palettes from the Shaw library.
• Tile size: 12 in × 12 in, 18 in × 18 in, or custom dimensions upon request.
• Overall thickness: 2.0 mm to 3.0 mm adjustable for load‑bearing needs.
• Wear layer thickness: 0.3 mm to 0.7 mm to balance cost and durability.
• Edge treatment: Square, beveled, or interlocking profiles.
• Backing options: Standard PVC backing or attached acoustic underlayment.

Quality Assurance & Testing

Incoming raw material is inspected for PVC purity and plasticizer content using FTIR spectroscopy to ensure consistent performance. During production, thickness is monitored at 100 mm intervals with laser gauges, and wear‑layer uniformity is verified by optical microscopy on a statistical sample of each batch.

Finished tiles undergo accelerated wear testing (ASTM D4060) and slip resistance testing (DIN 51130) before release. Results are recorded and available to customers upon request, providing traceability for each lot.

Packaging and Logistics

Tiles are stacked in corrugated cartons with interleaving sheets to prevent surface abrasion, then placed on standard 48 in × 40 in pallets. Each pallet is shrink‑wrapped and secured with polypropylene straps to withstand forklift handling and containerized shipment.

Pallet weight typically ranges from 800 kg to 1200 kg depending on tile thickness and quantity, allowing efficient truckload utilization. Export shipments include moisture‑barrier lining and corner protectors to mitigate damage during transit.

Frequently Asked Questions

• Can dimensions be customized? Yes, tile size and thickness can be adjusted per project specifications; tooling costs apply for non‑standard sizes.
• What information is required before quotation? Required details include desired tile size, thickness, wear‑layer thickness, color/pattern, quantity, and delivery destination.
• What materials are available? The core is PVC with optional plasticizer packages; wear layer is clear PVC with optional UV stabilizers or conductive additives.
• How is quality inspected? Incoming material checks, in‑process thickness monitoring, and final performance testing (abrasion, slip, chemical resistance) are standard.
• What packaging methods are available? Standard cartons on pallets with shrink wrap; custom packaging such as reusable crates can be arranged.
• How are export shipments protected? Moisture‑barrier lining, corner protectors, and strapping are used; additional insurance can be requested.
• What is the typical production lead time? Lead time ranges from 2 to 4 weeks depending on order size and customization level.
• How are samples arranged? Sample tiles (up to 2 m²) can be shipped at customer cost; freight charges are collect or prepaid as agreed.

Contact for Wholesale Inquiry

For pricing, lead times, or technical data sheets, please reach out to our wholesale team.