46
National patents
China High Traffic Homogeneous Vinyl Flooring Factory
Homogeneous vinyl flooring consists of a single-layer construction where color and pattern run throughout the thickness, providing consistent appearance even after surface wear. This structure
Order this product
China High Traffic Homogeneous Vinyl Flooring
Homogeneous vinyl flooring consists of a single-layer construction where color and pattern run throughout the thickness, providing consistent appearance even after surface wear.
This structure eliminates the need for a separate wear layer and allows the material to be sanded or refinished if required, extending service life in demanding environments.
Technical Characteristics
| Property | Typical Value | Test Method |
|---|---|---|
| Overall Thickness | 2.0 mm – 3.0 mm | ISO 24346 |
| Wear Layer Thickness (if applicable) | Integral – full thickness | – |
| Weight | 2,800 g/m² – 3,200 g/m² | ISO 23997 |
| Dimensional Stability (after heat exposure) | ≤ 0.25 % | ISO 23999 |
| Slip Resistance (R value) | R10 – R11 | DIN 51130 |
| Fire Classification | Bfl‑s1 (EN 13501‑1) | EN 13501‑1 |
Mechanical Performance
Abrasion resistance is measured by the loss of mass after a defined number of cycles under a standardized load; homogeneous vinyl typically shows less than 0.10 g loss after 1,000 cycles, indicating suitability for areas with continuous foot traffic.
Indentation resistance, assessed via the residual height after a static load, remains below 0.10 mm for 2.5 mm thick products, ensuring that heavy equipment such as hospital beds or retail fixtures does not cause permanent deformation.
Applications in High‑Traffic Environments
In airports, the flooring must endure rolling luggage carts, frequent cleaning chemicals, and fluctuating temperatures while maintaining a low‑maintenance surface; homogeneous vinyl meets these demands through its chemical‑resistant PVC matrix and seamless installation possibilities.
Healthcare facilities benefit from the material’s ability to be welded at seams, creating a impermeable barrier that inhibits microbial growth and facilitates compliance with hygiene standards.
Educational institutions and retail spaces value the consistent color depth, which hides minor scuffs and reduces the visual impact of wear over time.
Customization Options
- Overall thickness: 2.0 mm, 2.5 mm, 3.0 mm (customizable)
- Surface embossing: smooth, light texture, or deep‑grain patterns
- Color palette: standard RAL/NCS matches or custom pigment formulation
- Edge treatment: straight, beveled, or pre‑formed for welding
- Backing options: none (homogeneous) or attached fiberglass reinforcement for added dimensional stability
Quality Control & Manufacturing Considerations
Raw PVC resin is compounded with plasticizers, stabilizers, and pigments in a controlled batch process to achieve consistent melt flow and color dispersion.
The compound is fed through a calendaring line where it is formed into a sheet of precise thickness; online gauging monitors thickness variation within ±0.05 mm.
After cooling, the sheet is embossed (if specified), cut to roll width, and wound onto cores with interleaving protective film to prevent blocking.
Finished rolls undergo visual inspection, thickness verification, and a batch of physical tests (abrasion, indentation, dimensional stability) before release.
Packaging and Logistics
Standard rolls are supplied with a width of 2 m and lengths of 20 m to 30 m, wound on 76 mm diameter cardboard cores.
Each roll is wrapped in low‑density polyethylene film, placed on a pallet, and secured with straps; a typical 40‑foot container holds approximately 450 m² of product.
Pallets are labeled with batch numbers, thickness, and roll dimensions to facilitate traceability.
Lead Time and Sampling
Production lead time for standard configurations ranges from 15 to 25 working days after receipt of a confirmed purchase order, depending on order size and current plant load.
Samples measuring 300 mm × 300 mm can be dispatched within 5 working days; larger sample panels or custom‑color batches are available upon request and may extend the lead time.
Frequently Asked Questions
Can the thickness be adjusted for specific load requirements?
Yes. Thickness can be selected between 2.0 mm and 3.0 mm; thicker options provide higher indentation resistance and are recommended for areas with heavy rolling loads.
Is the flooring suitable for environments requiring frequent wet cleaning?
The PVC formulation is resistant to water, detergents, and common disinfectants; seams can be heat‑welded to create a continuous, impermeable surface.
What information is needed to obtain a quotation?
Required details include desired thickness, roll width, length, color or embossing preference, edge treatment, and delivery destination.
Contact for Technical Inquiry
For further technical details, customization requests, or to arrange a sample shipment, please reach out to our engineering team.
#
01
Vinyl flooring line
600
K+ SQ.M capacity
2007
Founded