46
National patents
China Roll Out Linoleum Flooring Factory
Linoleum flooring produced in roll form is a continuous sheet material made from oxidized linseed oil, wood flour, cork dust, mineral fillers, and pigments. The manufacturing process involves mixing
Order this product
China Roll Out Linoleum Flooring Factory
Linoleum flooring produced in roll form is a continuous sheet material made from oxidized linseed oil, wood flour, cork dust, mineral fillers, and pigments. The manufacturing process involves mixing these raw materials, calendaring the compound into a uniform thickness, and curing it in ovens to achieve cross‑linking of the oil matrix. Rolls typically range from 1.5 m to 2.0 m in width and are supplied in lengths up to 30 m, allowing seamless installation over large floor areas with minimal joints.
Technical Specifications
| Property | Typical Value | Test Method / Note |
|---|---|---|
| Thickness | 2.0 mm – 3.2 mm | ISO 24346 |
| Wear Layer Thickness | 0.5 mm – 0.8 mm | EN 428 |
| Density | 1.10 g/cm³ – 1.25 g/cm³ | ISO 1183 |
| Dimensional Stability (ΔL/L after 24 h at 70 °C) | ≤ 0.25 % | EN 434 |
| VOC Emission (TVOC after 28 days) | ≤ 0.5 mg/m³ | ISO 16000‑9 |
| Fire Rating | Bfl‑s1 (EN 13501‑1) | Classification |
Primary Applications
Because linoleum is inherently antimicrobial due to linseed oil oxidation, it suppresses bacterial growth without chemical additives. This property, combined with low VOC emissions and a service life exceeding 25 years under moderate traffic, makes it suitable for environments where hygiene and indoor air quality are regulated, such as healthcare facilities, laboratories, and educational institutions.
- Hospital wards and operating theatres – seamless surface prevents fluid ingress and facilitates cleaning.
- Pharmaceutical cleanrooms – low particle emission and chemical resistance to common disinfectants.
- School classrooms and libraries – static‑dissipative options reduce electrostatic discharge risk.
- Retail showrooms – aesthetic versatility with pigment‑in‑color options that do not fade under UV exposure.
- Industrial cafeterias – resistance to oil, grease, and moderate impact from dropped utensils.
Quality Control Philosophy
Each roll undergoes inline thickness monitoring via laser gauges with a tolerance of ±0.05 mm. After curing, samples are taken every 50 m for accelerated wear testing using a Taber Abrader (CS‑10 wheels, 500 g load) to verify that the wear layer loss does not exceed 0.02 mm per 1000 cycles. Chemical resistance is checked by immersing specimens in 3 % hydrogen peroxide and 10 % ammonium hydroxide for 24 hours, followed by visual inspection for swelling or discoloration. All test results are logged against the production batch number and are available to customers upon request.
Customization Options
- Thickness: selectable from 2.0 mm to 3.2 mm in 0.2 mm increments.
- Wear layer: optional reinforced polyurethane topcoat for enhanced abrasion resistance.
- Color: custom pigment matching available; standard palette includes 48 hues.
- Edge treatment: straight, beveled, or cove‑formed edges for wall‑base integration.
- Backing: optional jute or recycled PET felt for added acoustic absorption.
Packaging and Shipping
Rolls are wound on rigid cardboard cores with an inner diameter of 76 mm. Protective polyethylene film is applied to the outer surface to guard against moisture and mechanical damage during transit. Each pallet holds up to 12 rolls, stacked with interleaving corrugated sheets to prevent telescoping. For export, shipments are secured with steel straps and loaded into 20‑foot containers; a moisture‑desiccant packet is included to maintain relative humidity below 60 % inside the package.
Frequently Asked Questions
Q: Can the roll length be customized for specific project layouts?
A: Yes. Lengths can be adjusted between 10 m and 30 m per roll, subject to minimum order quantities that depend on the selected thickness and width.
A: Yes. Lengths can be adjusted between 10 m and 30 m per roll, subject to minimum order quantities that depend on the selected thickness and width.
Q: What information is required to obtain a quotation?
A: Required details include desired thickness, width, color code or sample, wear‑layer preference, total square meters needed, and delivery destination.
A: Required details include desired thickness, width, color code or sample, wear‑layer preference, total square meters needed, and delivery destination.
Q: How is product quality verified before shipment?
A: Each batch undergoes the inline thickness check, wear‑layer abrasion test, and chemical resistance test described above; a test report is attached to the shipping documentation.
A: Each batch undergoes the inline thickness check, wear‑layer abrasion test, and chemical resistance test described above; a test report is attached to the shipping documentation.
Q: What packaging methods are available for overseas orders?
A: Standard export packaging uses polyethylene‑wrapped rolls on cardboard cores, palletized with corrugated interleaving and secured with steel straps; custom crating can be arranged upon request.
A: Standard export packaging uses polyethylene‑wrapped rolls on cardboard cores, palletized with corrugated interleaving and secured with steel straps; custom crating can be arranged upon request.
Q: What is the typical production lead time?
A: Lead time ranges from 15 to 25 working days after receipt of confirmed purchase order and color approval, depending on order size and current plant load.
Contact Us for Technical Consultation
A: Lead time ranges from 15 to 25 working days after receipt of confirmed purchase order and color approval, depending on order size and current plant load.
#
01
Vinyl flooring line
600
K+ SQ.M capacity
2007
Founded