Wholesale Modern Lino Resilient Sheet Flooring Factory

Modern lino resilient sheet flooring combines a polyvinyl chloride (PVC) core with a printed design layer and a transparent wear layer to produce a flexible, sheet‑form product suitable for large‑area installations.

The manufacturing process involves calendaring the PVC core, laminating the design film, and applying a UV‑cured wear layer, resulting in consistent thickness and performance across the roll.

This construction provides dimensional stability under temperature fluctuations and resistance to indentation from rolling loads.

Material Composition

The wear layer is typically a 0.3 mm to 0.7 mm thick clear PVC film reinforced with aluminum oxide or silicon carbide particles for abrasion resistance.

Beneath it, a high‑resolution printing layer reproduces wood, stone or abstract patterns, while a PVC backing layer provides flexibility and moisture barrier properties.

Performance Characteristics

Overall thickness ranges from 2.0 mm to 3.5 mm, depending on the intended traffic level.

Wear resistance is expressed as a loss‑in‑mass after 1000 cycles of the Taber abrasion test, typically less than 0.05 g for commercial grades.

Slip resistance is measured by the pendulum test; products achieve a Pendulum Test Value (PTV) of 36 or higher, meeting R10 classification.

Dimensional change after exposure to 80 °C for 6 hours is less than 0.1 % in length and width, ensuring tight seams.

Volatile organic compound (VOC) emissions are tested according to ISO 16000‑9, with results below 0.5 mg/m³, contributing to indoor air quality compliance.

Applications

The flooring’s combination of wear resistance, moisture barrier, and acoustic dampening makes it suitable for environments where hygiene, durability, and comfort are priorities.

• Healthcare facilities: seamless surface prevents fluid ingress, and the wear layer withstands frequent disinfectant cleaning.
• Educational institutions: high impact resistance reduces damage from moving furniture, while acoustic backing lowers noise transmission in classrooms.
• Retail showrooms: dimensional stability allows large‑area installation without visible joints, preserving visual merchandising aesthetics.
• Light manufacturing zones: resistance to oils and chemicals protects the floor from spills, and the slip‑resistant surface meets safety standards for wet areas.

Quality Control & Testing

In‑line gauges monitor thickness and embossing depth at 10 cm intervals, triggering automatic adjustments if deviation exceeds ±0.05 mm.

Finished rolls are sampled for ASTM F1700 classification, abrasion resistance, and chemical resistance according to ISO 10582.

Each batch receives a test report that includes wear‑layer thickness, VOC content, and slip‑resistance value, available to customers upon request.

Customization Options

Because the product is supplied in roll form, several geometric and aesthetic parameters can be adjusted to match project specifications.

• Overall thickness: 2.0 mm, 2.5 mm, 3.0 mm, 3.5 mm (customizable in 0.5 mm increments).
• Wear‑layer thickness: 0.3 mm, 0.5 mm, 0.7 mm (affects abrasion rating).
• Embossing pattern: registered to print design or independent texture for slip enhancement.
• Edge treatment: straight cut, beveled, or prefabricated weldable edges for seamless installation.
• Color palette: standard CMYK library or custom Pantone matching for corporate branding.

Packaging & Shipping

Rolls are wound on rigid cardboard cores with inner diameter of 150 mm and outer diameter not exceeding 900 mm to facilitate handling with standard forklifts.

Each roll is wrapped in low‑density polyethylene film, placed on a pallet, and secured with corner protectors and stretch wrap to resist moisture and mechanical damage during transit.

Technical Specifications

Frequently Asked Questions

Can the sheet flooring be supplied in custom widths?

Yes, rolls can be slit to widths ranging from 1 m to 2 m according to project layout requirements.

What information is needed to obtain a quotation?

Please provide the required total area, desired thickness, wear‑layer specification, and any custom printing or embossing details.

How is product quality verified before shipment?

Each batch undergoes inline thickness monitoring, wear‑layer thickness measurement, and Taber abrasion testing; a test report accompanies the shipment.

What packaging options are available for export?

Standard packaging includes LDPE wrap, palletizing, and corner protection; additional moisture‑barrier bags or crating can be arranged upon request.

For technical data sheets, sample requests, or to discuss a specific project, please contact our sales team via the inquiry form.