Custom Sustainable Wall Coverings Manufacturer

Our wall covering systems are engineered to meet specific performance criteria such as abrasion resistance, dimensional stability, and low volatile organic compound emissions while incorporating post‑consumer recycled fibers or rapidly renewable resources.

Material Selection

We source base substrates from reclaimed wood pulp, bamboo fibers, or recycled polyester, each selected for its tensile strength and moisture absorption characteristics. Surface finishes are applied using water‑based coatings that achieve a VOC content below 50 g/L.

• Reclaimed wood pulp – tensile strength 30‑45 MPa, moisture content 8‑12 %
• Bamboo fiber – flexural modulus 8‑12 GPa, density 0.6‑0.8 g/cm³
• Recycled polyester – elongation at break 15‑25 %, recycled content 60‑80 %

Manufacturing Process

The production line integrates a closed‑loop water reclamation system that reduces fresh water intake by up to 40 %. Calendering rollers are set to achieve a target thickness tolerance of ±0.1 mm across the web width.

In-line spectrophotometry monitors color deviation, keeping ΔE values under 2.0 for consistent appearance across batches.

Customization Options

Customers can specify panel dimensions, edge profiles, and surface textures to align with interior design specifications and installation constraints.

• Panel width: 300 mm to 1200 mm (increment 50 mm)
• Panel height: up to 3000 mm (custom lengths available)
• Edge options: square, beveled, or recessed for seamless joints
• Surface textures: smooth, fine grain, or embossed pattern (depth 0.2‑0.8 mm)

Applications

These wall coverings are suited for environments where durability and indoor air quality are prioritized, such as healthcare corridors, educational facilities, and hospitality lobbies.

• Healthcare – resistant to frequent cleaning with disinfectants, meets ISO 22196 for antibacterial surfaces
• Education – low VOC emissions support compliance with CHPS standards for classroom air quality
• Hospitality – high abrasion rating (ASTM D4060) withstands heavy foot traffic while maintaining aesthetic finish

Quality Control Philosophy

Each production lot undergoes systematic inspection to verify thickness, weight per unit area, and coating adhesion. Samples are conditioned at 23 °C/50 % RH for 24 hours before testing to ensure repeatable results.

Technical Specifications

Frequently Asked Questions

Can dimensions be customized?

Yes. Panel width, height, and edge profile are defined per project specifications. Custom lengths up to 3000 mm are available without tooling changes.

What information is required before quotation?

We need the intended application area, required performance criteria (e.g., abrasion class, fire rating), substrate preference, and any specific dimensions or surface finish.

Which materials are available?

Standard options include reclaimed wood pulp, bamboo fiber, and recycled polyester. Alternative bio‑based polymers can be evaluated upon request.

How is quality inspected?

Each lot is sampled for thickness, weight, tensile strength, and coating adhesion. Results are compared against the agreed specification sheet before release.

What packaging methods are available?

Panels are stacked flat, separated by recyclable corrugated interleaves, and wrapped in polyethylene film. Palletized loads conform to ISPM‑15 for export.

What is the typical production lead time?

Lead time ranges from 3 to 6 weeks depending on order complexity and current capacity. Exact schedules are confirmed at order acknowledgment.

Get in Touch

To discuss your project requirements and receive a technical quotation, please use the contact form below.