Wholesale Cedar Wall Planks Coverings

Cedar wall planks are manufactured from sustainably harvested softwood known for its low density, natural preservative oils, and consistent grain structure. These characteristics contribute to reduced thermal bridging and moderate acoustic absorption in interior partitions.

Material Characteristics

Western red cedar typically exhibits a density between 320 and 380 kg/m³ at 12 % moisture content, which facilitates easy handling while maintaining sufficient stiffness for wall cladding. The wood contains thujaplicins, compounds that resist fungal decay and insect attack without chemical treatment.

Dimensional stability is enhanced through controlled kiln drying to a target moisture content of 8–10 %, minimizing shrinkage after installation. The longitudinal modulus of elasticity averages 8–10 GPa, providing adequate resistance to impact loads in light‑industrial environments.

Manufacturing Process

Logs are sawn to rough dimensions, then stacked in kilns where temperature and humidity are regulated to achieve uniform moisture content. Subsequent planing produces smooth faces with a tolerance of ±0.5 mm on thickness and width.

Edge profiling, such as shiplap or tongue‑and‑groove, is performed on CNC routers to ensure tight joints that limit air infiltration. Surface finishes range from smooth sanded to brushed texture, depending on customer specifications.

Typical Dimensions and Tolerances

Applications in Industrial Settings

Cedar’s low thermal conductivity (≈0.11 W/m·K) helps maintain stable interior temperatures in warehouses and workshops, reducing HVAC load. Its natural aroma contributes to a pleasant working environment without emitting volatile organic compounds.

The material’s moderate sound absorption coefficient (≈0.15 at 500 Hz) aids in lowering reverberant noise in large‑volume spaces, improving speech intelligibility for operational staff.

• Interior wall cladding for manufacturing halls
• Acoustic panel backing in testing laboratories
• Decorative partitions in showroom areas
• Ceiling soffits where lightweight support is required

Customization Options

• Length: cut‑to‑size from 1.2 m to 6.0 m
• Width: 75 mm, 100 mm, 150 mm, or custom
• Thickness: 12 mm, 16 mm, 20 mm, or tapered profiles
• Surface finish: smooth sanded, brushed, or sawn‑textured
• Edge profile: square, shiplap, tongue‑and‑groove, or recessed
• Treatment: optional kiln‑drying to 6 % MC, or application of water‑based sealers

Quality Control & Inspection

Each batch undergoes moisture‑content sampling using pin‑type meters, with acceptance criteria of ±1 % around the target. Visual grading follows NLGA rules, rejecting boards with knots exceeding 30 % of face area or splits longer than 50 mm.

Dimensional checks are performed on a statistical sample of 5 % of pieces, measuring thickness and width at three points along the length. Surface roughness is assessed with a profilometer to ensure Ra ≤ 20 µm for sanded finishes.

Packaging and Shipping

Planks are bundled in units of 0.2 m³, wrapped in polyethylene film to protect against moisture ingress during transit. Bundles are placed on heat‑treated pallets and secured with polyester strapping, allowing for efficient forklift handling.

For export shipments, containers are lined with silica‑gel desiccant packs to maintain relative humidity below 60 %. Loading plans are optimized to maximize weight distribution, reducing the risk of panel deformation.

Frequently Asked Questions

Get a Quote

To discuss your specific requirements for cedar wall plank coverings, please provide your project details through our inquiry form. Our technical team will respond with a detailed quotation and lead‑time estimate.

Request a Quote